ANSWER
- Use the designated network Ethernet port to connect the Factbird EDGE to your local network. Although the device has four Ethernet ports, only one is used for network connectivity during normal operation.
ADDITIONAL DETAILS
- The network Ethernet port provides the Factbird EDGE with access to your local network and the internet.
- The second Ethernet port is not used for network connectivity as part of the standard installation procedure.
- If you are unsure which port to use, refer to the port labels on the device or the Factbird EDGE Installation Guide.
LIMITATIONS (if applicable)
- Only the designated network Ethernet port should be connected to your network.
- Connecting the network cable to the incorrect Ethernet port may prevent the Factbird EDGE from establishing a network connection.