SUMMARY
Use this guide to exclude specific stop types from the target calculations on the Batch & Shift Dashboard. This allows production targets to reflect only the production time that is relevant to your operation.
WHEN TO USE THIS
- Use this guide if:
- You want to exclude specific stop types from batch or shift target calculations.
- You want production targets to better reflect your operational processes.
PREREQUISITES
- Before starting:
- You have access to the Batch or Shift Dashboard.
- You have permission to modify dashboard settings.
STEPS
- Open the required production line.
- Navigate to the Batch Dashboard or Shift Dashboard.
- Click the Dashboard icon to open the dashboard settings.
- Locate the list of available stop types.
- Select the checkbox next to each stop type you want to subtract from the target calculation.
- Leave any stop types you do not want to subtract unchecked.
- Save your changes.
EXPECTED RESULT
- After completing these steps:
- The selected stop types are excluded from the batch or shift target calculations.
- Dashboard targets are calculated using the updated configuration.
TROUBLESHOOTING
Issue: The target calculation has not changed.
- Try: Verify that the required stop types have been selected.
- Try: Refresh the dashboard after saving the configuration.
Issue: The wrong stop types are being excluded.
- Try: Review the selected stop types in the dashboard settings.
- Try: Update the selection and save the configuration again.
STILL NEED HELP?
- Contact Support and include:
- The production line name.
- Whether you are using the Batch Dashboard or Shift Dashboard.
- A screenshot of the dashboard settings.
- The stop types you expect to subtract from the target calculation.
RELATED ARTICLES