Factbird Duo devices are supporting both PNP and PNP as sensor type. On the newer Factbird Duo devices the default sensor type is PNP. The sensor type can be changed in the sensor settings dialog under the section "Sensor Setup". After updating the sensor settings it can take up to a few minutes before the change completed on the device.
Articles in this section
- Factbird DUO – LED Status Overview
- Troubleshooting: Cannot Find or Claim Factbird DUO (Device Not Found or “Device Already Claimed”)
- Troubleshooting: Factbird DUO Firmware Update Fails, Gets Stuck, or the Button is Greyed Out
- Factbird DUO update button is not pressable or grey
- Factbird DUO Firmware update is stuck
- Troubleshooting: Device Randomly Reboots or Shows Unstable Performance
- Troubleshooting: No Data or No Count on My Line
- Troubleshooting: Missing Data / Factbird DUO Offline
- Troubleshooting: No Count While Line Is Running
- Troubleshooting: Factbird Production Counts Are Too High (Double Counts or Spikes)
- See more